Linux 自动测试
in Blog
如何搭建一个嵌入式Linux的自动测试平台？
目录
最近需要在嵌入式Linux板上搭建一套测试平台，需要满足如下需求：
- 需要运行一些如i2c_tools等命令，测试硬件的工作状态。
- 可以控制外部电源做冷启动。
- 可以将运行结果返回给服务器。
- 方便集成到gitlab中，利用ci指定运行时间或次数。
- 收集测试日志，测试结果，生成report。
然后发现了这样一个Python开发的，基本可以满足上述需求的，针对嵌入式Linux的自动测试工具：tbot。本文将简要介绍如何利用tbot搭建一套测试平台以满足上述需求。
目标结构
官方这里给出了一个预设的结构，基本可以满足目前的需求，其中：
- tbot host：用于执行tbot的命令，同时gitlab也搭建在这个服务器上，最后会将tbot的命令通过gitlab的ci运行。
- Lab Host：由于服务器在机房，不太方便插板子，因此搞了一个ubuntu台式机连到内网，板子插到了这台台式机上。
- Board：是这次的DUT（device under test）
- Buildhost：目前没有用到，由于一般嵌入式Linux可以在uboot阶段通过tftp加载kernel镜像并挂载文件系统，因此后续可以设置一个编译服务器，将镜像编译出来加载到板子上，并将这部分功能加入到gitlab中。
安装
安装步骤省略介绍，详情看官方文档。
创建工程
按照如下目录结构新建文件
./
├──config/
│ └──board_config.py # 板子相关的配置
└──tc/
│ ├──test_linux.py # linux测试用例
│ ├──test_uboot.py # uboot测试用例
│ └──interactive.py # 用来访问板子上的shell
└──conftest.py # pytest的配置文件
配置目标板
# board_config.py
import tbot
import time
from tbot.machine import board, connector, linux
class Board_EVB(connector.ConsoleConnector, board.PowerControl, board.Board):
''' board 的基本配置 '''
baudrate = 115200
serial_port = "/dev/ttyUSB0"
def connect(self, mach: linux.LinuxShell):
return mach.open_channel('picocom', '-b', str(self.baudrate), self.serial_port)
def poweron(self) -> None:
tbot.log.message('Power on')
# 1. 如果有程控电源，可以在labhost上执行对应的命令给目标板上电。
# with tbot.ctx.request(tbot.role.LocalHost) as lo:
# lo.exec0('sispmctl')
# 2. 如果没有程控电源，目标板是Linux，通过reboot命令重启。
time.sleep(0.1)
# 发送ctrl-c，结束当运行命令。
self.ch.sendcontrol('C')
time.sleep(0.1)
self.ch.sendline('reboot')
# 3. 也使用U-Boot，也可以从uboot重启。“cat”用于确保我们不会将“reset”发送到Linux，因为这会干扰终端。。。
self.ch.sendline("cat")
self.ch.sendline("reset")
def poweroff(self) -> None:
with tbot.ctx.request(tbot.role.LocalHost) as lo:
tbot.log.message('Power off')
class Board_EVB_Linux(board.Connector, board.LinuxBootLogin, linux.Ash):
username = 'root' # linux bord 的用户名
password = '123456' # linux board 的密码
def init(self):
''' 可以做一些初始化，为后面测试做准备 '''
pass
class Board_EVB_Uboot(board.Connector, board.UBootAutobootIntercept, board.UBootShell):
prompt = '=> ' # u-boot 终端提示符
class Server(connector.SSHConnector, linux.Bash):
hostname = '10.8.32.196'
username = 'admin'
port = 22
ignore_hostkey = True
authenticator = linux.auth.PasswordAuthenticator("123456")
def register_machines(ctx):
''' 将上述 class 注册为各种role，后续编写测试用例会用到 '''
ctx.register(Board_EVB, tbot.role.Board)
ctx.register(Board_EVB_Linux, tbot.role.BoardLinux)
ctx.register(Board_EVB_Uboot, tbot.role.BoardUBoot)
ctx.register(Server, tbot.role.LabHost)
编写测试用例
# interactive.py
import tbot
@tbot.testcase
def board() -> None:
"""Open an interactive session on the board's serial console."""
with tbot.ctx.request(tbot.role.Board) as b:
b.interactive()
@tbot.testcase
def linux() -> None:
"""Open an interactive session on the board's Linux shell."""
with tbot.ctx.request(tbot.role.BoardLinux) as lnx:
lnx.interactive()
@tbot.testcase
def uboot() -> None:
"""Open an interactive session on the board's U-Boot shell."""
tbot.ctx.teardown_if_alive(tbot.role.BoardLinux)
with tbot.ctx.request(tbot.role.BoardUBoot) as ub:
ub.interactive()
# test_linux.py
from time import sleep, time
import tbot
DATA_DIR='/data'
# 由于后续会与pytest结合，生成xml和html格式测试报告，
# 因此测试用例的函数名需要以test开头，以便pytest可以识别到
@tbot.testcase
def test_setup():
with tbot.ctx.request(tbot.role.BoardLinux) as lnx:
tbot.log.message('Set up the testing environment')
lnx.exec0('mkdir', '-p', f'{DATA_DIR}')
lnx.exec0('mount', '/dev/mmcblk0p1', '/data')
lnx.ch.sendcontrol('M')
@tbot.testcase
def test_norflash_read():
with tbot.ctx.request(tbot.role.BoardLinux) as lnx:
tbot.log.message('Start testing norflash')
lnx.exec0('fio', '-filename=/dev/mtdblock1', '-direct=1',
'-iodepth=1', '-thread', '-rw=read', '-ioengine=psync',
'-bs=1M', '-size=10M', '-numjobs=1', '-runtime=1', '-group_reporting',
'-name=file')
sleep(5)
@tbot.testcase
def test_norflash_write():
with tbot.ctx.request(tbot.role.BoardLinux) as lnx:
tbot.log.message('Start testing norflash')
lnx.exec0('fio', '-filename=/dev/mtdblock1', '-direct=1',
'-iodepth=1', '-thread', '-rw=write', '-ioengine=psync',
'-bs=1M', '-size=10M', '-numjobs=1', '-runtime=1', '-group_reporting',
'-name=file')
sleep(5)
# 省略后续测试用例
# conftest.py
import pytest
import tbot
from tbot import newbot
def pytest_addoption(parser, pluginmanager):
parser.addoption("--tbot-config", action="append", default=[], dest="tbot_configs")
parser.addoption("--tbot-flag", action="append", default=[], dest="tbot_flags")
def pytest_configure(config):
# Only register configuration when nobody else did so already.
if not tbot.ctx.is_active():
# Register flags
for tbot_flag in config.option.tbot_flags:
tbot.flags.add(tbot_flag)
# Register configurations
for tbot_config in config.option.tbot_configs:
newbot.load_config(tbot_config, tbot.ctx)
@pytest.fixture(scope="session", autouse=True)
def tbot_ctx(pytestconfig):
with tbot.ctx:
# Configure the context for keep_alive (so machines can be reused
# between tests). reset_on_error_by_default will make sure test
# failures lead to a powercycle of the DUT anyway.
with tbot.ctx.reconfigure(keep_alive=True, reset_on_error_by_default=True):
# Tweak the standard output logging options
with tbot.log.with_verbosity(tbot.log.Verbosity.STDOUT, nesting=1):
yield tbot.ctx
gitlab ci 集成
stages: # List of stages for jobs, and their order of execution
- test
variables:
REPEAT_COUNT:
value: "5"
description: "The number of repetitions of test cases"
tbot-test-job: # This job runs in the test stage.
stage: test # It only starts when the job in the build stage completes successfully.
tags:
- test
when: manual
artifacts:
paths:
- report
when: always
reports:
junit: report/report.xml
script:
- source /home/chenyu.wang/.venv/bin/activate
- mkdir report
# - newbot -c config.board_dr1x90_ad101_v10 tc.test_linux.test_norflash_read
- pytest --tbot-config config.board_dr1x90_ad101_v10 -vs --count=$REPEAT_COUNT --junitxml="./report/report.xml" ./tc/test_linux.py | tee report/test.log
运行效果
============================= test session starts ==============================
platform linux -- Python 3.8.16, pytest-7.4.0, pluggy-1.2.0 -- /home/chenyu.wang/.venv/bin/python
cachedir: .pytest_cache
rootdir: /var/lib/gitlab-runner/builds/1y6pz3-N/0/embedded-sw/tbot
collecting ... collected 11 items
tc/test_linux.py::test_setup │ ├─Calling test_setup ...
│ │ ├─[local] sshpass -p 123456 ssh -o StrictHostKeyChecking=no -p 22 anlogic@10.8.32.196
│ │ ├─[local] sshpass -p 123456 ssh -o StrictHostKeyChecking=no -p 22 anlogic@10.8.32.196
│ │ ├─[server] picocom -b 115200 /dev/ttyUSB0
│ │ ├─POWERON (board_dr1x90_ad101_v10)
│ │ ├─Power on
│ │ ├─LINUX (board_dr1x90_ad101_v10_-linux)
│ │ │ <> picocom v3.1
│ │ │ <>
│ │ │ <> port is : /dev/ttyUSB0
│ │ │ <> flowcontrol : none
│ │ │ <> baudrate is : 115200
│ │ │ <> parity is : none
│ │ │ <> databits are : 8
│ │ │ <> stopbits are : 1
│ │ │ <> escape is : C-a
│ │ │ <> local echo is : no
│ │ │ <> noinit is : no
│ │ │ <> noreset is : no
│ │ │ <> hangup is : no
│ │ │ <> nolock is : no
│ │ │ <> send_cmd is : sz -vv
│ │ │ <> receive_cmd is : rz -vv -E
│ │ │ <> imap is :
│ │ │ <> omap is :
│ │ │ <> emap is : crcrlf,delbs,
│ │ │ <> logfile is : none
│ │ │ <> initstring : none
│ │ │ <> exit_after is : not set
│ │ │ <> exit is : no
│ │ │ <>
│ │ │ <> Type [C-a] [C-h] to see available commands
│ │ │ <> Terminal ready
│ │ │ <> ^C
│ │ │ <> [36mboard_dr1x90_ad101_v10_-linux: [32m~[0m> reboot
│ │ │ <> [36mboard_dr1x90_ad101_v10_-linux: [32m~[0m> Stopping linuxptp system clock synchronization: OK
│ │ │ <> Stopping linuxptp daemon: start-stop-daemon: warning: killing process 153: No such process
│ │ │ <> FAIL
│ │ │ <> Stopping sshd: OK
│ │ │ <> Stopping network: OK
│ │ │ <> Saving random seed: OK
│ │ │ <> Stopping klogd: OK
│ │ │ <> Stopping syslogd: OK
│ │ │ <> umount: devtmpfs busy - remounted read-only
│ │ │ <> umount: can't unmount /: Invalid argument
│ │ │ <> The system is going down NOW!
│ │ │ <> Sent SIGTERM to all processes
│ │ │ <>
│ │ │ <> Sent SIGKILL to all processes
│ │ │ <> [59808.009015] reboot: Restarting system
│ │ │ <> DDR Init V3
│ │ │ <> [DDR GPLL] fck = 533.333 MHz, fbk_div = 64
│ │ │ <> [DDR PPC] Enable Lane Mask = 0xF
│ │ │ <> [DDR MDL CAL] DX0 mdl = 0x1270127
│ │ │ <> [DDR MDL CAL] DX1 mdl = 0x1270129
│ │ │ <>
│ │ │ <> [DDR MDL CAL] DX2 mdl = 0x1290129
│ │ │ <> [DDR MDL CAL] DX3 mdl = 0x1290129
│ │ │ <> [DDR DCC] #0 initial dutyx = 0x1f
│ │ │ <> [DDR DCC] #1 initial dutyx = 0x1f
│ │ │ <> [DDR DCC] #2 initial dutyx = 0x1f
│ │ │ <> [DDR DCC] #3 initial dutyx = 0x1f
│ │ │ <> [DDR DCC] #4 initial dutyx = 0x1f
│ │ │ <> [DDR DCC] #5 initial dutyx = 0x1f
│ │ │ <> [DDR DCC] #6 initial dutyx = 0x1f
│ │ │ <> [DDR DCC] #7 initial dutyx = 0x1f
│ │ │ <> [DDR DCC] #0 pol = 0x0, dutyx = 0x1f, overflow = 0x0, undeflow = 0
│ │ │ <> [DDR DCC] #1 pol = 0x0, dutyx = 0x1f, overflow = 0x0, undeflow = 0
│ │ │ <> [DDR DCC] #2 pol = 0x0, dutyx = 0x1f, overflow = 0x0, undeflow = 0
│ │ │ <> [DDR DCC] #3 pol = 0x0, dutyx = 0x1f, overflow = 0x0, undeflow = 0
│ │ │ <> [DDR DCC] #4 pol = 0x0, dutyx = 0x1f, overflow = 0x0, undeflow = 0
│ │ │ <> [DDR DCC] #5 pol = 0x0, dutyx = 0x1f, overflow = 0x0, undeflow = 0
│ │ │ <> [DDR DCC] #6 pol = 0x0, dutyx = 0x1f, overflow = 0x0, undeflow = 0
│ │ │ <> [DDR DCC] #7 pol = 0x0, dutyx = 0x1f, overflow = 0x0, undeflow = 0
│ │ │ <> [DDR MRS] DDR3 Mode
│ │ │ <> [DDR MRS] MR0 = 0x950
│ │ │ <> [DDR MRS] MR1 = 0x44
│ │ │ <>
│ │ │ <> [DDR MRS] MR2 = 0x210
│ │ │ <> [DDR MRS] MR3 = 0x0
│ │ │ <> [DDR WL] DX0GSR0.WLPRD = 0
│ │ │ <> [DDR WL] Done
│ │ │ <> [DDR GATE] DX0GSR0.GDQSPRD = 146
│ │ │ <> [DDR GATE] Done
│ │ │ <> [DDR WLADJ] Done
│ │ │ <> ========================================
│ │ │ <> DX DGSL WLSL WLD WDQD DQSGD RDQSD RDQSND
│ │ │ <> ----------------------------------------
│ │ │ <> 0 3 2 16 73 65 72 73
│ │ │ <> 1 3 2 21 73 58 72 73
│ │ │ <> 2 3 2 43 73 79 73 73
│ │ │ <> 3 3 2 40 74 83 72 73
│ │ │ <> ========================================
│ │ │ <> [DDR TRAIN #0] RDDSKE:O WRDSKW:X RDEYE:X WREYE:X
│ │ │ <> [DDR TRAIN #1] RDDSKE:O WRDSKW:O RDEYE:O WREYE:O
│ │ │ <> ========================================
│ │ │ <> DX DGSL WLSL WLD WDQD DQSGD RDQSD RDQSND
│ │ │ <> ----------------------------------------
│ │ │ <> 0 3 2 17 37 86 107 96
│ │ │ <> 1 3 2 22 40 82 108 99
│ │ │ <> 2 3 2 44 41 101 109 95
│ │ │ <> 3 3 2 41 37 104 108 97
│ │ │ <> ========================================
│ │ │ <>
│ │ │ <> [DDR MTEST] #0x0, bistDone = 0x1, DxErr = 0x0, rcvCnt = 117
│ │ │ <> [DDR MTEST] #0x1, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x2, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x3, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x4, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x5, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x6, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x7, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x8, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x9, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0xa, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0xb, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0xc, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0xd, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0xe, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0xf, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x10, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x11, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x12, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x13, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x14, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x15, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x16, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x17, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x19, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x1a, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> [DDR MTEST] #0x1b, bistDone = 0x1, DxErr = 0x0, rcvCnt = 128
│ │ │ <> ==================== In Stage 1 ====================
│ │ │ <> System reset
│ │ │ <> PMU Error Config Init
│ │ │ <> PMU Error Config Init
│ │ │ <> history reset reason: 00000002
│ │ │ <> history pmu status 0: 00000000
│ │ │ <> history pmu status 1: 00000000
│ │ │ <> mark fsbl is running...
│ │ │ <> ==================== In Stage 2 ====================
│ │ │ <> Boot Mode: 0x00000005
│ │ │ <> EMMC or SD Boot Mode
│ │ │ <> multi boot offset is 0
│ │ │ <>
│ │ │ <> Response: 0x900
│ │ │ <> CMD 1 send err, code: 0x18000
│ │ │ <> Bus width is 4-bit
│ │ │ <> ----------Card Info----------
│ │ │ <> |-Device: mmc@0xf8049000
│ │ │ <> |-Manufacturer ID: 0x3
│ │ │ <> |-OEM: 0x5344
│ │ │ <> |-Name: SL16G
│ │ │ <> |-Bus Speed: 50000 KHz
│ │ │ <> |-Mode: High Speed
│ │ │ <> |-Rd Block Len: 512
│ │ │ <> |-Version: 3
│ │ │ <> |-High Capacity: YES
│ │ │ <> |-Capacity: 14.8GB
│ │ │ <> |-Bus Width: 4-bit
│ │ │ <> -----------------------------
│ │ │ <> drv is sd
│ │ │ <> file name is BOOT.bin
│ │ │ <> FsblInstancePtr->ImageOffsetAddress: 0x0
│ │ │ <> boot header copy finished...
│ │ │ <> Calculated Checksum: 0x344c7492
│ │ │ <> checksum check pass...
│ │ │ <> partition headers copy finished...
│ │ │ <> image header authentication not enabled....
│ │ │ <> qspi width sel : 0x00000000
│ │ │ <> image id : 0x43474c41
│ │ │ <> enc status : 0x00000000
│ │ │ <> bh attribute : 0x00000000
│ │ │ <> bh ac offset : 0x00000000
│ │ │ <> first parti hdr offset: 0x00000300
│ │ │ <> partition num : 0x00000003
│ │ │ <> bh checksum : 0x344c7492
│ │ │ <> ==================== In Stage 3 ====================
│ │ │ <> wdt restart
│ │ │ <> Partition Header Checksum: 0x0f9502a6
│ │ │ <> Calculated Checksum: 0x0f9502a6
│ │ │ <> checksum check pass...
│ │ │ <> Hash Type: 0x00000800
│ │ │ <> Hash SHA256.
│ │ │ <> Auth Type : 0
│ │ │ <> Efuse Auth Type : 0
│ │ │ <> Authentication NOT enabled...
│ │ │ <> Enc Type : 0
│ │ │ <> Efuse Enc Type : 0
│ │ │ <> Encrypt NOT enabled.
│ │ │ <> destination cpu: 0x00000020
│ │ │ <> destination dev: 0x00000080
│ │ │ <> check partition length:
│ │ │ <>
│ │ │ <> Partition Length : 0x002bec40
│ │ │ <> Extracted Partition Length : 0x002bec08
│ │ │ <> Total Partition Length : 0x002bec80
│ │ │ <> Next Partition Header Offset: 0x00000380
│ │ │ <> Dest Execution Address : 0xffffffff
│ │ │ <> Dest Load Address : 0x200000
│ │ │ <> Partition Offset : 0x00025200
│ │ │ <> Partition Attribute : 0x000008a0
│ │ │ <> Hash Data offset : 0x002e3e40
│ │ │ <> AC Offset : 0x00000000
│ │ │ <> Partition Header Checksum : 0x0f9502a6
│ │ │ <>
│ │ │ <> loading pl partition...
│ │ │ <> PCAP RESET
│ │ │ <> Re-enable PCAP
│ │ │ <> Boot device block size max: 4000
│ │ │ <> PL init done
│ │ │ <> cfg state: 00000001
│ │ │ <> Auth type : 00
│ │ │ <> Hash type : 02
│ │ │ <> Enc type : 65
│ │ │ <> Enc mode : 00
│ │ │ <> Key mode : 6e
│ │ │ <> to ddr in a whole block, then to pcap
│ │ │ <> partition src address : 0x00025200
│ │ │ <> partition load dest address: 0x00100000
│ │ │ <> partition length : 0x002bec40
│ │ │ <> whole block
│ │ │ <> calculate hash
│ │ │ <> read hash
│ │ │ <> Hash check passed...
│ │ │ <>
│ │ │ <> cfg state before progdone: 00000007
│ │ │ <> ==================== In Stage 3 ====================
│ │ │ <> wdt restart
│ │ │ <> Partition Header Checksum: 0xbcb16562
│ │ │ <> Calculated Checksum: 0xbcb16562
│ │ │ <> checksum check pass...
│ │ │ <> Hash Type: 0x00000800
│ │ │ <> Hash SHA256.
│ │ │ <> Auth Type : 0
│ │ │ <> Efuse Auth Type : 0
│ │ │ <> Authentication NOT enabled...
│ │ │ <> Enc Type : 0
│ │ │ <> Efuse Enc Type : 0
│ │ │ <> Encrypt NOT enabled.
│ │ │ <> destination cpu: 0x00000020
│ │ │ <> destination dev: 0x00000000
│ │ │ <> check partition length:
│ │ │ <>
│ │ │ <> Partition Length : 0x000c6f40
│ │ │ <> Extracted Partition Length : 0x000c6f32
│ │ │ <> Total Partition Length : 0x000c6f80
│ │ │ <> Next Partition Header Offset: 0x00000000
│ │ │ <> Dest Execution Address : 0x200000
│ │ │ <> Dest Load Address : 0x200000
│ │ │ <> Partition Offset : 0x002e3e80
│ │ │ <> Partition Attribute : 0x00000820
│ │ │ <> Hash Data offset : 0x003aadc0
│ │ │ <> AC Offset : 0x00000000
│ │ │ <> Partition Header Checksum : 0xbcb16562
│ │ │ <>
│ │ │ <> loading ps partition...
│ │ │ <> partition src address : 0x2e3e80
│ │ │ <> partition load dest address: 0x200000
│ │ │ <> partition length : 0x000c6f40
│ │ │ <> Auth type : 00
│ │ │ <> Hash type : 02
│ │ │ <> Enc type : 65
│ │ │ <> Enc mode : 00
│ │ │ <> Key mode : 6e
│ │ │ <> calculate hash
│ │ │ <> Hash check passed...
│ │ │ <> ps partition copy finished
│ │ │ <> Update handoff values
│ │ │ <> ==================== In Stage 4 ====================
│ │ │ <> Mark FSBL is completed...
│ │ │ <> wdt disable
│ │ │ <>
│ │ │ <>
│ │ │ <> U-Boot 2021.01-g6520da2793 (Mar 04 2024 - 16:17:10 +0800)
│ │ │ <>
│ │ │ <> CPU: Anlogic dr1m90
│ │ │ <> Model: Anlogic dr1m90 demo board
│ │ │ <> DRAM: 1 GiB
│ │ │ <> SF: Detected n25q128a11 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
│ │ │ <> MMC: mmc@f8049000: 0
│ │ │ <> Loading Environment from FAT... *** Warning - bad CRC, using default environment
│ │ │ <>
│ │ │ <> In: serial@f8401000
│ │ │ <> Out: serial@f8401000
│ │ │ <> Err: serial@f8401000
│ │ │ <> Model: Anlogic dr1m90 demo board
│ │ │ <> Net: eth0: ethernet@F8100000
│ │ │ <> Hit any key to stop autoboot: 3 2 1 0
│ │ │ <> switch to partitions #0, OK
│ │ │ <> mmc0 is current device
│ │ │ <> ** Unrecognized filesystem type **
│ │ │ <> Scanning mmc 0:1...
│ │ │ <> Found U-Boot script /boot.scr
│ │ │ <> 472 bytes read in 16 ms (28.3 KiB/s)
│ │ │ <> ## Executing script at 13000000
│ │ │ <>
│ │ │ <> Partition Map for MMC device 0 -- Partition Type: DOS
│ │ │ <>
│ │ │ <> Part Start Sector Num Sectors UUID Type
│ │ │ <> 1 8192 31108096 00000000-01 0c
│ │ │ <> 7572921 bytes read in 336 ms (21.5 MiB/s)
│ │ │ <> 11969060 bytes read in 518 ms (22 MiB/s)
│ │ │ <> 16281 bytes read in 20 ms (794.9 KiB/s)
│ │ │ <> ## Booting kernel from Legacy Image at 01000000 ...
│ │ │ <> Image Name: Linux
│ │ │ <> Image Type: AArch64 Linux Kernel Image (lz4 compressed)
│ │ │ <> Data Size: 7572857 Bytes = 7.2 MiB
│ │ │ <> Load Address: 00400000
│ │ │ <> Entry Point: 00400000
│ │ │ <> Verifying Checksum ... OK
│ │ │ <> ## Loading init Ramdisk from Legacy Image at 09000000 ...
│ │ │ <> Image Name: Initrd
│ │ │ <> Image Type: AArch64 Linux RAMDisk Image (lz4 compressed)
│ │ │ <> Data Size: 11968996 Bytes = 11.4 MiB
│ │ │ <> Load Address: 00000000
│ │ │ <> Entry Point: 00000000
│ │ │ <> Verifying Checksum ... OK
│ │ │ <> ## Flattened Device Tree blob at 08000000
│ │ │ <> Booting using the fdt blob at 0x8000000
│ │ │ <> Uncompressing Kernel Image
│ │ │ <> Loading Ramdisk to 3dc90000, end 3e7fa1e4 ... OK
│ │ │ <> Loading Device Tree to 000000003dc89000, end 000000003dc8ff98 ... OK
│ │ │ <>
│ │ │ <> Starting kernel ...
│ │ │ <>
│ │ │ <> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd040]
│ │ │ <> [ 0.000000] Linux version 6.1.54-rt15-g899b22ebd57d (wangxiaoyong@AE-virtual-machine) (aarch64-linux-gnu-gcc (Linaro GCC 7.5-2019.12) 7.5.0, GNU ld (Linaro_Binutils-2019.12) 2.28.2.20170706) #1 SMP PREEMPT Mon Dec 18 16:40:10 CST 2023
│ │ │ <> [ 0.000000] Machine model: Anlogic, DR1M90 FPSoc
│ │ │ <> [ 0.000000] earlycon: uart0 at MMIO32 0x00000000f8401000 (options '')
│ │ │ <> [ 0.000000] printk: bootconsole [uart0] enabled
│ │ │ <> [ 0.000000] efi: UEFI not found.
│ │ │ <> [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002dc00000, size 256 MiB
│ │ │ <> [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
│ │ │ <> [ 0.000000] Zone ranges:
│ │ │ <> [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
│ │ │ <> [ 0.000000] DMA32 empty
│ │ │ <> [ 0.000000] Normal empty
│ │ │ <> [ 0.000000] Movable zone start for each node
│ │ │ <> [ 0.000000] Early memory node ranges
│ │ │ <> [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003fffffff]
│ │ │ <> [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
│ │ │ <> [ 0.000000] psci: probing for conduit method from DT.
│ │ │ <> [ 0.000000] psci: PSCIv0.2 detected in firmware.
│ │ │ <> [ 0.000000] psci: Using standard PSCI v0.2 function IDs
│ │ │ <> [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
│ │ │ <> [ 0.000000] percpu: Embedded 21 pages/cpu s45224 r8192 d32600 u86016
│ │ │ <> [ 0.000000] pcpu-alloc: s45224 r8192 d32600 u86016 alloc=21*4096
│ │ │ <> [ 0.000000] pcpu-alloc: [0] 0 [0] 1
│ │ │ <> [ 0.000000] Detected VIPT I-cache on CPU0
│ │ │ <> [ 0.000000] CPU features: detected: GIC system register CPU interface
│ │ │ <> [ 0.000000] alternatives: applying boot alternatives
│ │ │ <> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
│ │ │ <> [ 0.000000] Kernel command line: console=ttyS0,115200n8 earlycon=uart,mmio32,0xf8401000 loglevel=8 mtdparts=alspinor:1M(boot),-(data)
│ │ │ <> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
│ │ │ <> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
│ │ │ <> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
│ │ │ <> [ 0.000000] Memory: 739080K/1048576K available (9024K kernel code, 1338K rwdata, 2792K rodata, 1472K init, 571K bss, 47352K reserved, 262144K cma-reserved)
│ │ │ <> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
│ │ │ <> [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
│ │ │ <> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
│ │ │ <> [ 0.000000] Trampoline variant of Tasks RCU enabled.
│ │ │ <> [ 0.000000] Tracing variant of Tasks RCU enabled.
│ │ │ <> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
│ │ │ <> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
│ │ │ <> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
│ │ │ <> [ 0.000000] GICv3: 160 SPIs implemented
│ │ │ <> [ 0.000000] GICv3: 0 Extended SPIs implemented
│ │ │ <> [ 0.000000] Root IRQ handler: gic_handle_irq
│ │ │ <> [ 0.000000] GICv3: GICv3 features: 16 PPIs
│ │ │ <> [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000dd040000
│ │ │ <> [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
│ │ │ <> [ 0.000000] arch_timer: cp15 timer(s) running at 33.33MHz (virt).
│ │ │ <> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns
│ │ │ <> [ 0.000001] sched_clock: 56 bits at 33MHz, resolution 30ns, wraps every 2199023255551ns
│ │ │ <> [ 0.008265] Console: colour dummy device 80x25
│ │ │ <> [ 0.012741] Calibrating delay loop (skipped), value calculated using timer frequency.. 66.66 BogoMIPS (lpj=133333)
│ │ │ <> [ 0.023068] pid_max: default: 32768 minimum: 301
│ │ │ <> [ 0.027900] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
│ │ │ <> [ 0.035292] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
│ │ │ <> [ 0.044663] cblist_init_generic: Setting adjustable number of callback queues.
│ │ │ <> [ 0.051905] cblist_init_generic: Setting shift to 1 and lim to 1.
│ │ │ <> [ 0.058069] cblist_init_generic: Setting adjustable number of callback queues.
│ │ │ <> [ 0.065288] cblist_init_generic: Setting shift to 1 and lim to 1.
│ │ │ <> [ 0.071540] rcu: Hierarchical SRCU implementation.
│ │ │ <> [ 0.076338] rcu: Max phase no-delay instances is 1000.
│ │ │ <> [ 0.081897] EFI services will not be available.
│ │ │ <> [ 0.086708] smp: Bringing up secondary CPUs ...
│ │ │ <> [ 0.091805] Detected VIPT I-cache on CPU1
│ │ │ <> [ 0.091922] GICv3: CPU1: found redistributor 1 region 0:0x00000000dd060000
│ │ │ <>
│ │ │ <> [ 0.091978] CPU1: Booted secondary processor 0x0000000001 [0x411fd040]
│ │ │ <> [ 0.092111] smp: Brought up 1 node, 2 CPUs
│ │ │ <> [ 0.113606] SMP: Total of 2 processors activated.
│ │ │ <> [ 0.118307] CPU features: detected: 32-bit EL0 Support
│ │ │ <> [ 0.123462] CPU features: detected: CRC32 instructions
│ │ │ <> [ 0.128676] CPU: All CPU(s) started at EL1
│ │ │ <> [ 0.132767] alternatives: applying system-wide alternatives
│ │ │ <> [ 0.139636] devtmpfs: initialized
│ │ │ <> [ 0.147839] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
│ │ │ <> [ 0.157579] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
│ │ │ <> [ 0.174421] DMI not present or invalid.
│ │ │ <> [ 0.179140] NET: Registered PF_NETLINK/PF_ROUTE protocol family
│ │ │ <> [ 0.186318] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
│ │ │ <>
│ │ │ <> [ 0.193481] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
│ │ │ <> [ 0.201346] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
│ │ │ <> [ 0.209322] audit: initializing netlink subsys (disabled)
│ │ │ <> [ 0.214998] audit: type=2000 audit(0.140:1): state=initialized audit_enabled=0 res=1
│ │ │ <> [ 0.215509] thermal_sys: Registered thermal governor 'fair_share'
│ │ │ <> [ 0.222742] thermal_sys: Registered thermal governor 'bang_bang'
│ │ │ <> [ 0.228820] thermal_sys: Registered thermal governor 'step_wise'
│ │ │ <> [ 0.235128] ASID allocator initialised with 65536 entries
│ │ │ <> [ 0.263897] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
│ │ │ <> [ 0.270707] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
│ │ │ <> [ 0.277009] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
│ │ │ <> [ 0.283778] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
│ │ │ <> [ 0.290030] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
│ │ │ <> [ 0.296796] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
│ │ │ <> [ 0.303049] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
│ │ │ <> [ 0.309815] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
│ │ │ <> [ 0.317239] dw_dmac f804d000.ahb_dma: WARN: Device release is not defined so it is not safe to unbind this driver while in use
│ │ │ <> [ 0.329050] dw_dmac f804d000.ahb_dma: DesignWare DMA Controller, 8 channels
│ │ │ <> [ 0.336754] SCSI subsystem initialized
│ │ │ <> [ 0.340776] usbcore: registered new interface driver usbfs
│ │ │ <> [ 0.346301] usbcore: registered new interface driver hub
│ │ │ <> [ 0.351638] usbcore: registered new device driver usb
│ │ │ <> [ 0.357465] pps_core: LinuxPPS API ver. 1 registered
│ │ │ <> [ 0.362425] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
│ │ │ <> [ 0.371543] PTP clock support registered
│ │ │ <> [ 0.375866] FPGA manager framework
│ │ │ <> [ 0.380254] vgaarb: loaded
│ │ │ <> [ 0.383330] clocksource: Switched to clocksource arch_sys_counter
│ │ │ <> [ 0.398926] NET: Registered PF_INET protocol family
│ │ │ <> [ 0.404072] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
│ │ │ <> [ 0.413617] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
│ │ │ <> [ 0.422054] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
│ │ │ <> [ 0.429809] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
│ │ │ <> [ 0.437650] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
│ │ │ <> [ 0.445163] TCP: Hash tables configured (established 8192 bind 8192)
│ │ │ <> [ 0.451623] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
│ │ │ <> [ 0.458269] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
│ │ │ <> [ 0.465552] NET: Registered PF_UNIX/PF_LOCAL protocol family
│ │ │ <> [ 0.471740] RPC: Registered named UNIX socket transport module.
│ │ │ <> [ 0.477662] RPC: Registered udp transport module.
│ │ │ <> [ 0.482362] RPC: Registered tcp transport module.
│ │ │ <> [ 0.487059] RPC: Registered tcp NFSv4.1 backchannel transport module.
│ │ │ <> [ 0.493492] PCI: CLS 0 bytes, default 64
│ │ │ <> [ 0.497873] Trying to unpack rootfs image as initramfs...
│ │ │ <> [ 0.504051] workingset: timestamp_bits=62 max_order=18 bucket_order=0
│ │ │ <> [ 0.524075] NFS: Registering the id_resolver key type
│ │ │ <> [ 0.529343] Key type id_resolver registered
│ │ │ <> [ 0.533654] Key type id_legacy registered
│ │ │ <> [ 0.537769] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
│ │ │ <> [ 0.544550] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
│ │ │ <> [ 0.552014] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
│ │ │ <> [ 0.629955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
│ │ │ <> [ 0.646456] dma-pl330 f8419000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use
│ │ │ <> [ 0.659391] dma-pl330 f8419000.dma-controller: Loaded driver for PL330 DMAC-341330
│ │ │ <> [ 0.667024] dma-pl330 f8419000.dma-controller: DBUFF-16x16bytes Num_Chans-8 Num_Peri-4 Num_Events-16
│ │ │ <> [ 0.680234] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
│ │ │ <> [ 0.688238] printk: console [ttyS0] disabled
│ │ │ <> [ 0.712935] f8401000.serial: ttyS0 at MMIO 0xf8401000 (irq = 28, base_baud = 3125000) is a U6_16550A
│ │ │ <> [ 0.722446] printk: console [ttyS0] enabled
│ │ │ <> [ 0.722462] printk: bootconsole [uart0] disabled
│ │ │ <> [ 0.723972] printk: console [ttyS0] printing thread started
│ │ │ <> [ 0.739912] brd: module loaded
│ │ │ <> [ 0.745708] Freeing initrd memory: 11688K
│ │ │ <> [ 0.747630] loop: module loaded
│ │ │ <> [ 0.748741] dw_spi_mmio f8404000.spi: Synopsys DWC APB SSI v4.03
│ │ │ <> [ 0.748763] dw_spi_mmio f8404000.spi: Detected FIFO size: 32 bytes
│ │ │ <>
│ │ │ <> [ 0.748773] dw_spi_mmio f8404000.spi: Detected 32-bits max data frame size
│ │ │ <> [ 0.748863] dw_dmac f804d000.ahb_dma: private_candidate: dma0chan0 filter said false
│ │ │ <> [ 0.748877] dmaengine: __dma_request_channel: success (dma0chan1)
│ │ │ <> [ 0.748906] dmaengine: __dma_request_channel: success (dma0chan0)
│ │ │ <> [ 0.749106] dw_spi_mmio f8404000.spi: registered master spi0
│ │ │ <> [ 0.749327] spi spi0.0: setup mode 0, 8 bits/w, 8000000 Hz max --> 0
│ │ │ <> [ 0.749729] dw_spi_mmio f8404000.spi: registered child spi0.0
│ │ │ <>
│ │ │ <> [ 0.749968] dw_spi_mmio f8405000.spi: Synopsys DWC APB SSI v4.03
│ │ │ <> [ 0.749987] dw_spi_mmio f8405000.spi: Detected FIFO size: 32 bytes
│ │ │ <> [ 0.749997] dw_spi_mmio f8405000.spi: Detected 32-bits max data frame size
│ │ │ <> [ 0.750058] dw_dmac f804d000.ahb_dma: private_candidate: dma0chan0 busy
│ │ │ <> [ 0.750069] dw_dmac f804d000.ahb_dma: private_candidate: dma0chan1 busy
│ │ │ <> [ 0.750079] dw_dmac f804d000.ahb_dma: private_candidate: dma0chan2 filter said false
│ │ │ <> [ 0.750089] dmaengine: __dma_request_channel: success (dma0chan3)
│ │ │ <> [ 0.750121] dw_dmac f804d000.ahb_dma: private_candidate: dma0chan0 busy
│ │ │ <> [ 0.750130] dw_dmac f804d000.ahb_dma: private_candidate: dma0chan1 busy
│ │ │ <> [ 0.750139] dmaengine: __dma_request_channel: success (dma0chan2)
│ │ │ <> [ 0.750313] dw_spi_mmio f8405000.spi: registered master spi1
│ │ │ <> [ 0.750478] spi spi1.0: setup mode 0, 8 bits/w, 8000000 Hz max --> 0
│ │ │ <> [ 0.750912] dw_spi_mmio f8405000.spi: registered child spi1.0
│ │ │ <> [ 0.751499] al-qspi f804e000.spi: registered master spi2
│ │ │ <> [ 0.751664] spi spi2.0: setup mode 0, 8 bits/w, 10000000 Hz max --> 0
│ │ │ <> [ 0.751926] spi-nor spi2.0: n25q128a11 (16384 Kbytes)
│ │ │ <> [ 0.751997] 2 cmdlinepart partitions found on MTD device alspinor
│ │ │ <> [ 0.752007] Creating 2 MTD partitions on "alspinor":
│ │ │ <> [ 0.752017] 0x000000000000-0x000000100000 : "boot"
│ │ │ <> [ 0.753028] 0x000000100000-0x000001000000 : "data"
│ │ │ <> [ 0.753967] al-qspi f804e000.spi: registered child spi2.0
│ │ │ <> [ 0.755091] CAN device driver interface
│ │ │ <> [ 0.757292] dwc-eth-dwmac f8100000.ethernet0: User ID: 0x10, Synopsys ID: 0x52
│ │ │ <> [ 0.757312] dwc-eth-dwmac f8100000.ethernet0: DWMAC4/5
│ │ │ <> [ 0.757323] dwc-eth-dwmac f8100000.ethernet0: DMA HW capability register supported
│ │ │ <> [ 0.757332] dwc-eth-dwmac f8100000.ethernet0: RX Checksum Offload Engine supported
│ │ │ <> [ 0.757341] dwc-eth-dwmac f8100000.ethernet0: TX Checksum insertion supported
│ │ │ <> [ 0.757349] dwc-eth-dwmac f8100000.ethernet0: TSO supported
│ │ │ <> [ 0.757357] dwc-eth-dwmac f8100000.ethernet0: Enable RX Mitigation via HW Watchdog Timer
│ │ │ <>
│ │ │ <> [ 0.757367] dwc-eth-dwmac f8100000.ethernet0: Enabled RFS Flow TC (entries=10)
│ │ │ <> [ 0.757383] dwc-eth-dwmac f8100000.ethernet0: TSO feature enabled
│ │ │ <> [ 0.757393] dwc-eth-dwmac f8100000.ethernet0: Using 32/32 bits DMA host/device width
│ │ │ <> [ 0.766769] dwc2 f8180000.usb: supply vusb_d not found, using dummy regulator
│ │ │ <> [ 0.766944] dwc2 f8180000.usb: supply vusb_a not found, using dummy regulator
│ │ │ <> [ 0.767513] dwc2 f8180000.usb: DWC OTG Controller
│ │ │ <> [ 0.767546] dwc2 f8180000.usb: new USB bus registered, assigned bus number 1
│ │ │ <> [ 0.767578] dwc2 f8180000.usb: irq 35, io mem 0xf8180000
│ │ │ <> [ 0.767794] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
│ │ │ <> [ 0.767810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
│ │ │ <> [ 0.767822] usb usb1: Product: DWC OTG Controller
│ │ │ <> [ 0.767832] usb usb1: Manufacturer: Linux 6.1.54-rt15-g899b22ebd57d dwc2_hsotg
│ │ │ <> [ 0.767842] usb usb1: SerialNumber: f8180000.usb
│ │ │ <> [ 0.768445] hub 1-0:1.0: USB hub found
│ │ │ <> [ 0.768482] hub 1-0:1.0: 1 port detected
│ │ │ <> [ 0.769671] usbcore: registered new interface driver uas
│ │ │ <> [ 0.769760] usbcore: registered new interface driver usb-storage
│ │ │ <> [ 0.770003] i2c_dev: i2c /dev entries driver
│ │ │ <> Starting syslogd: [ 0.773024] i2c i2c-0: Added multiplexed i2c bus 1
│ │ │ <> OK
│ │ │ <> [ 0.773222] i2c i2c-0: Added multiplexed i2c bus 2
│ │ │ <> [ 0.773635] at24 3-0054: supply vcc not found, using dummy regulator
│ │ │ <> [ 0.792732] at24 3-0054: 1024 byte 24c08 EEPROM, writable, 16 bytes/write
│ │ │ <> Starting klogd: [ 0.792815] i2c i2c-0: Added multiplexed i2c bus 3
│ │ │ <> [ 0.856635] rtc-ds1307 4-0068: registered as rtc0
│ │ │ <> OK
│ │ │ <> [ 0.869699] rtc-ds1307 4-0068: setting system clock to 2000-01-01T20:24:10 UTC (946758250)
│ │ │ <> [ 0.869785] i2c i2c-0: Added multiplexed i2c bus 4
│ │ │ <> [ 0.869984] i2c i2c-0: Added multiplexed i2c bus 5
│ │ │ <> [ 0.870176] i2c i2c-0: Added multiplexed i2c bus 6
│ │ │ <> [ 0.870357] i2c i2c-0: Added multiplexed i2c bus 7
│ │ │ <> Running sysctl: [ 0.870546] i2c i2c-0: Added multiplexed i2c bus 8
│ │ │ <> [ 0.870561] pca954x 0-0074: registered 8 multiplexed busses for I2C switch pca9548
│ │ │ <> [ 0.871085] sdhci: Secure Digital Host Controller Interface driver
│ │ │ <> [ 0.871090] sdhci: Copyright(c) Pierre Ossman
│ │ │ <> [ 0.871097] sdhci-pltfm: SDHCI platform and OF driver helper
│ │ │ <> OK[ 0.872553] usbcore: registered new interface driver usbhid
│ │ │ <>
│ │ │ <> [ 0.872563] usbhid: USB HID core driver
│ │ │ <> [ 0.873382] ipip: IPv4 and MPLS over IPv4 tunneling driver
│ │ │ <> [ 0.873989] gre: GRE over IPv4 demultiplexor driver
│ │ │ <> Saving random seed: [ 0.873995] ip_gre: GRE over IPv4 tunneling driver
│ │ │ <> [ 0.875303] IPv4 over IPsec tunneling driver
│ │ │ <> [ 0.876563] NET: Registered PF_INET6 protocol family
│ │ │ <>
│ │ │ <> [ 0.879120] Segment Routing with IPv6
│ │ │ <> [ 0.879180] In-situ OAM (IOAM) with IPv6
│ │ │ <> [ 0.880005] NET: Registered PF_PACKET protocol family
│ │ │ <> [ 0.880026] NET: Registered PF_KEY protocol family
│ │ │ <> [ 0.880032] can: controller area network core
│ │ │ <> [ 0.880174] NET: Registered PF_CAN protocol family
│ │ │ <> [ 0.880183] can: raw protocol
│ │ │ <> [ 0.880192] can: broadcast manager protocol
│ │ │ <> [ 0.880203] can: netlink gateway - max_hops=1
│ │ │ <> [ 0.880600] Key type dns_resolver registered
│ │ │ <> [ 0.889997] Key type encrypted registered
│ │ │ <> [ 0.895053] of-fpga-region soc:base_fpga_region: FPGA Region probed
│ │ │ <> [ 0.896449] input: soc:keys as /devices/platform/soc/soc:keys/input/input0
│ │ │ <> [ 0.906383] of_cfs_init
│ │ │ <> [ 0.906491] of_cfs_init: OK
│ │ │ <> [ 0.907408] mmc0: SDHCI controller on f8049000.mmc [f8049000.mmc] using ADMA
│ │ │ <> [ 0.908381] Freeing unused kernel memory: 1472K
│ │ │ <> [ 0.967923] Checked W+X mappings: passed, no W+X pages found
│ │ │ <> [ 0.967958] Run /init as init process
│ │ │ <> [ 0.967966] with arguments:
│ │ │ <> [ 0.967968] /init
│ │ │ <> [ 0.967972] with environment:
│ │ │ <> [ 0.967975] HOME=/
│ │ │ <> [ 0.967978] TERM=linux
│ │ │ <> [ 1.058909] mmc0: new high speed SDHC card at address aaaa
│ │ │ <> [ 1.063692] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
│ │ │ <> [ 1.075850] mmcblk0: p1
│ │ │ <>
│ │ │ <> [ 2.243349] random: crng init done
│ │ │ <> OK
│ │ │ <> Starting network: OK
│ │ │ <> ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519
│ │ │ <> Starting sshd: OK
│ │ │ <> Starting linuxptp daemon: OK
│ │ │ <> Starting linuxptp system clock synchronization: OK
│ │ │ <>
│ │ │ <>
│ │ │ <> Welcome to Buildroot
│ │ │ <> buildroot login: root
│ │ │ <> Password:
│ │ ├─Set up the testing environment
│ │ ├─[board_dr1x90_ad101_v10_-linux] mkdir -p /boot
│ │ ├─[board_dr1x90_ad101_v10_-linux] mount /dev/mmcblk0p3 /data
│ │ │ ## mount: mounting /dev/mmcblk0p3 on /data failed: No such file or directory
│ │ ├─POWEROFF (board_dr1x90_ad101_v10)
│ │ ├─Power off
│ │ └─Fail. (17.780s)
FAILED
